Shopping Cart
Your Cart is Empty
Quantity:
Subtotal
Taxes
Shipping
Total
There was an error with PayPalClick here to try again
CelebrateThank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart

Noize Boyz​

Custom Car Audio and Video

905-751-0626

[email protected]

Arc Audio Processors / EQ's / OEM Integration

PS8 PRO

PRO Series DSP technology is a flexible and yet powerful platform that allows itself to be adapted to a wide variety of applications and products with zero compromises to sound quality. Capable of processing audio streams up to 192kHz at 32-bit, the ARC Audio Pro Series DSP platform raises the bar on high-end audiophile and OEM integration system tuning.

Specifications

Processor Type Stand Alone Unit

Processor Resolution Fixed Point Native 32-Bits

Sample Rate 96kHz/192kHz

Analog Inputs 8 ch. Differential in (RCA or Speaker Level)

Input Sensitivity .5V - 32V RMS

Digital Inputs TOSLink

Auto-sense Turn-On Yes, Signal & DC (BTL) (Uses Ch 1/2 Inputs Only)

Outputs (RCA) 8-Channels

Outputs Voltage (RCA) Up to 8V

Input Impedance (rca) 10k ohms

Frequency Response 2Hz - 23.5kHz

S/N Ratio 1V 1:1 107.1dBdB

S/N 4V 1:1 108.dBdB

Operating Voltage 6V - 17.0V (Start Stop Compliance to 4.5V)

Output Equalization 248 Bands 1/3rd Octave (linkable) -or- 248 Bands variable Parametric EQ

Output Equalization Resolution 1/10th dB per step +20dB / -24dB

Output Signal Delay Up to 30ms per channel in .01ms increments (Fixed Point Delay)

Input Signal Mixer Yes - 10-Channels In (Including Digital) x 10-Channels Out (Including Up-Mixer Out)

Advanced Mixer (Output Signal Mixer) Yes, When Selected

Easy-to-use Mixer Assistant Yes, Exclusive to the PS8-Pro, PS8-50 and IPS8.8

Crossovers Phase Correct AP/HP/LP/BP all channels

Crossover Slopes 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Slopes all bands all channels

Crossover Types Butterworth, Linkwitz-Riley, Bessel, Variable Q, Chebyshev (all channels all bands)

Crossover selectable frequencies 10Hz - 20kHz in .01 Hz increments)

Output Signal up mixer Yes

Input Signal Equalization 12 Bands Parametric (linkable) Per Channel

Input Equalization Resolution 1/10th dB per step +20dB / -24dB

Input Equalization All Pass Filters Yes - Individual per input EQ band

Input Signal Delay Yes - Up to 11.04ms per channel input

Presets Up to 4-Presets

Hi-Res Bluetooth (Streaming Audio) Yes - Requires ARC BTM & BDM (Both Required) (Sold Separately)

External Remote Level Control Yes (ARC PSC or LR1) (Sold as an accessory, not included)

AXP WiFi control adapter card Exclusive to the Pro Series DSP's

Preset selection without controller use Yes - Optional manual trigger switches +/- for up to 4 presets (Not Included)

Remote Turn-On Output Controls Turn on Output (up to 40ms), Turn-on Hold (up to 40ms), Auto-sense hold time (up to 200ms)

Remote Turn-On Output On/Off lead timing control Remote on/off adjustable up to 40 seconds each

Maestro AR Module interface capable Yes - Requires Maestro T-Harness, ARC/IDATA signal adapter cable and data cable for connection

Expansion Capability (8-CH, 16-CH, 24-CH PS8-Pro can be ran in multiples with individual USB connections to a single PC with single operating software being used

Software Interface Windows PC Required (Windows 8 & Windows 10)

Windows OS Notice Note that the Pro-Series software is ONLY recommended for use with authentic licensed versions of the Windows Operating system. Use of counterfeit, cracked or hacked versions are not guaranteed to work and can cause unwanted and/or undesired results while using any ARC branded DSP or ANY DSP on the market. Use of anything other than an authentic licensed version of Windows will void ALL warranty and support of ARC Audio DSP products and its user interface

Dimensions 8.5"(L) x 5.1"(W) x 1.81"(H)

IPS8.8

The IPS8.8 is ARC Audio's first complete and yet optional integrated solution for today’s new ARC Series amplifiers. Introduced as a plug and play drop-in DSP solution for ARC Audio’s ARC Series amplifiers the IPS8.8 replaces the front end, input board, with just the removal of a few screws and connection cables and gives users the power of the new Pro-Series DSP technology developed exclusively for ARC Audio.

Specifications

Processor Type Front end amp module (ARC Series amps only)

Compatible With- ARC 1000.2, ARC 1000.4, ARC 1000.6 ONLY

Processor Resolution Fixed Point Native 32-Bits

Sample Rate 96kHz/192kHz

Analog Inputs 8 ch. Differential in (RCA or Speaker Level)

Input Sensitivity .5V - 32V RMS

Digital Inputs TOSLink

Auto-sense Turn-On Yes, Signal & DC (BTL) (Uses Ch 1/2 Inputs Only)

Outputs (RCA) N/A

Outputs Voltage (RCA) N/A

Input Impedance (rca) 10k ohms

Frequency Response 2Hz - 23.5kHz

S/N Ratio 1V 1:1 107.1dBdB

S/N 4V 1:1 108.dBdB

Operating Voltage 6V - 17.0V (Start Stop Compliance to 4.5V)

Output Equalization 248 Bands 1/3rd Octave (linkable) -or- 248 Bands variable Parametric EQ

Output Equalization Resolution 1/10th dB per step +20dB / -24dB

Output Signal Delay Up to 30ms per channel in .01ms increments (Fixed Point Delay)

Input Signal Mixer Yes - 10-Channels In (Including Digital) x 10-Channels Out (Including Up-Mixer Out)

Advanced Mixer (Output Signal Mixer) Yes, When Selected

Easy-to-use Mixer Assistant Yes, Exclusive to the PS8-Pro, PS8-50 and IPS8.8

Crossovers Phase Correct AP/HP/LP/BP all channels

Crossover Slopes 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Slopes all bands all channels

Crossover Types Butterworth, Linkwitz-Riley, Bessel, Variable Q, Chebyshev (all channels all bands)

Crossover selectable frequencies 10Hz - 20kHz in .01 Hz increments)

Output Signal up mixer Yes

Input Signal Equalization 12 Bands Parametric (linkable) Per Channel

Input Equalization Resolution 1/10th dB per step +20dB / -24dB

Input Equalization All Pass Filters Yes - Individual per input EQ band

Input Signal Delay Yes - Up to 11.04ms per channel input

Presets Up to 4-Presets

Hi-Res Bluetooth (Streaming Audio) Yes - Requires ARC BTM & BDM (Both Required) (Sold Separately)

External Remote Level Control Yes (ARC PSC or LR1) (Sold as an accessory, not included)

AXP WiFi control adapter card Exclusive to the Pro Series DSP's (Sold Separately)

Preset selection without controller use Yes - Optional manual trigger switches +/- for up to 4 presets (Not Included)

Remote Turn-On Output Controls Turn on Output (up to 40ms), Turn-on Hold (up to 40ms), Auto-sense hold time (up to 200ms)

Remote Turn-On Output On/Off lead timing control Remote on/off adjustable up to 40ms each

Maestro AR Module interface capable Yes - Requires Maestro T-Harness and data cable for connection

Expansion Capability (8-CH, 16-CH, 24-CH PS8-Pro can be ran in multiples with individual USB connections to a single PC with single operating software being used

Software Interface Windows PC Required (Windows 8 & Windows 10)

Windows OS Notice Note that the Pro-Series software is ONLY recommended for use with authentic licensed versions of the Windows Operating system. Use of counterfeit, cracked or hacked versions are not guaranteed to work and can cause unwanted and/or undesired results while using any ARC branded DSP or ANY DSP on the market. Use of anything other than an authentic licensed version of Windows will void ALL warranty and support of ARC Audio DSP products and its user interface

PS8

Specifications

Current Software Version Version 3.0.3 Posted May 16th, 2018

Current Firmware Version Version 201079 Posted May 16th, 2018

Analog Inputs 6 ch. Differential in (RCA or Speaker Level)

Digital InputsmCoaxial and TOSLink

Input Sensitivity (Low Level) 28mV - 8V RMS

Input Sensitivity (Speaker Level) 72mV - 20V RMS

Autosense Turn-On Yes (Uses Ch 1&2 Inputs Only)

Aux Input (1) 3.5mm unbalanced input (selectable)

Outputs (RCA) 8 Channels

Outputs Voltage (RCA) 8V

Input Impedance (rca) 10k ohms

Input Impedance (speaker) 200 ohms

Frequency Response 2Hz - 23.5kHz

Gain Range 88dB

S/N Ratio 1V 1:1 96.5dBdB

S/N 4V 1:1 108.5dBdB

Operating Voltage 6V - 16.8V (Start Stop Compliance to 4.5V)

Interface Windows PC Required (Windows 8 & Windows 10)

Equalization 248 Bands 1/3rd Octave (linkable) and Band Specific Parametric

Equalization Resolution 1/10th dB per step +15dB / -24dB

Signal Delay Up to 12ms per channel in .01ms increments (Fixed Point Delay)

Crossovers Phase Correct AP/HP/LP/BP all channels

Crossover Slopes 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Slopes all bands all chanels

Crossover Types Butterworth, Linkwitz-Riley, Bessel, Variable Q (all channels all bands)

Crossover selectable frequencies 10Hz - 20kHz in .01 hz increments)

Presets Up to three presets (presets include all tuning and setup features)

Bluetooth (Streaming Audio) Yes - Requires ARC BTM

External Remote Level Control Yes (ARC PSC) (Sold as an accessory, not included)

Preset selection without controller use

Yes - Optional Hardwired 3-position switch (Not Included)

Remote Turn-On Output On/Off lead timing control

Remote on/off adjustable up to 40ms each

Windows OS Notice Note that the PS8 software is ONLY recommended for use with authentic licensed versions of the Windows Operating system. Use of counterfeit, cracked or hacked versions are not guaranteed to work and can cause unwanted and/or undesired results while using the PS8 or ANY DSP on the market. Use of anything other than an authentic licensed version of Windows will void ALL warranty and support of the PS8 and its user interface

Dimensions 9.85"(L) x 5.12"(W) x 1.2"(H)

PSM

Compact and powerful the PSM digital sound processor gives you the power to tailor your systems sound to your own personal style. As well as the power to integrate and correct some of today’s more advanced OEM integration based systems in your vehicle or motorcycle.

Specifications

Current Software & Firmware Version Version 1.0.1.13 Posted July 30th 2018

Analog Inputs 6 ch. Differential in (RCA or Speaker Level)

Digital Inputs No

Input Sensitivity (Low Level) 40mV - 4V RMS

Input Sensitivity (Speaker Level) 20mV - 12V RMS

Autosense Turn-On Yes

Outputs (RCA) 6 Channels

Frequency Response 20Hz - 20kHz

Operating Voltage 9V - 17.0V (Start Stop Compliance to 6V)

Interface Windows PC Required (Windows 7 64-bit, Windows 8 & Windows 10)

Equalization Parametric 42 Bands (7-Bands Per Channels) w/ adjustable Q and Frequency

Equalization Resolution 1/10th dB per step +15dB / -24dB

Signal Delay Up to 5ms per channel in .02ms increments

Crossovers AP/HP/LP/BP all channels

Crossover Type Butterworth, Linkwitz-Riley, Bessel (All Channels)

Remote Level Control LR1 Compatible Only (Sold as an accessory, not included)

Solution Type Stand-alone design

Predefined Tunes Yes - Comes loaded with HD factory deck counter tune. Additional tunes coming soon

Pigtail Harnesses Included

RCA In+Out Pigtails, Speaker level Input Harness (is plug and play compatible with MPAK Kit installations)

Power Harness Fused and pre-loomed PNP power harness included

Dimensions 3.75"(L) x 3.0"(W) x 1.35"(H)

PSC

Complete control and detail! The PSC is not just another DSP volume control that gives you presets and volume control. The PSC gives users of our PS8, PS8-Pro, IPS8.8 and PS8-50 the ultimate in on-the-fly tuning power and much more right at their fingertips.

Specifications

Controller Digital Full Function

Volume Control Yes

System Muting/Unmuting Yes

System Fader/Balance Control Yes - Definable in the PS8 User Software

Sub Level Control Yes - Definable in the PS8 User Software

Crossover Control Yes - Complete (Damping, Slope, Frequency, - All Channels)

Equalizer Control (Ch 1-4) Yes - Full individual channel and global control of all Third Octave EQ controls

Signal Phase Control (Ch 5) Yes - 0/180 all channels

System Turn-On capability without source or auto-detect Yes - Only when PSC and PS8, PS8-Pro, IPS8.8 or PS8-50 are combined

Screen Type OLED

Screen/Button Orientation Rotation Yes- User defined

Dimmable Lighting Yes- Use Defined

Dimmable Lighting Trigger Yes- Via hardwired trigger on PS8

Illumination and Display Lighting Color Adjustment Yes - User Defined

Firmware Updates Done thru the compatible ARC Audio processor software utility

Digital Serial Number Encryption Yes - Internal for tracking purposes

Dimensions- Cradle Mounting (Cutout) 1.873"(H) x 3.46" (W) x .8"(D)

Maximum Outer Dimensions 3.841" (L) x 2.15" (W) x 1.38" (H, Control Knob Included)

Other products required for operation Yes - PS8, PS8-Pro, IPS8.8 or PS8-50

LR1

The ARC Audio LR1 DSP level remote control is a simple and easy to use programmable remote level control for select ARC Audio digital sound processors. All of the LR1's control configurations are assignable through your DSP's user interface on your PC.

KEQ5

The ARC Audio KEQ5 offers users a plethora of control for most any automotive, marine or UTV application including master volume, fader and dedicated sub level controls while boasting up to an impressive 9 volts of signal to your amplifiers. 5-Bands user-defined equalization with +/-12dB per band of adjustability allows you to really dial in that personalize and user tailored sound that you are looking for on the fly without breaking the bank or needing a computer to control.

Specifications

EQ Type 5-Band Parametric

Frequency Centers 50Hz, 250Hz, 500Hz, 2kHz, 10kHz

Boost Cut Per Center +/- 12dB

Frequency Response 10Hz - 50kHz S/N Ratio 100dB

THD .005%

Input Impedance 47k Ohms

Output Impedance 56.6k Ohms

Voltage Output 5 Volts

Dimensions Industry Standard Half Din

XEQ

Simple, elegant, compact in form and designed with only the highest grade audiophile grade components the XEQ is a powerful and yet refined piece of electronics that allows users to dial in their system in a simple operation to their individual needs.

Specifications

EQ Type 7-Band Parametric

Frequency Centers 50Hz, 125Hz, 315Hz, 750Hz, 2.2 kHz, 6kHz, 16kHz

Boost Cut Per Center +/- 12dB

Frequency Response 10Hz - 30kHz

S/N Ratio 100dB

THD .005%

Input Impedance 10k Ohms

Output Impedance 1k Ohms

Voltage Output 8 Volts

Dimensions Industry Standard Half Din

0